Features Of Both Table Saws
Design
These table saws were equally strong enough to do the job when compared side-by-side. There are still some differences.
The Hitachi C10RJ table saw has a convenient fold and roll stand and 20 cm all-terrain rubber wheels. It can be set up upright or rolled around easily. You can fold the Hitachi and keep it upright. If you have a tight space for storage, the Hitachi C10RJ is a great option.
As for the Dewalt DWE7491RS table saw, it has a rolling stand. It is easy to move. Although you might need a bigger space to store this one compared to the C10RJ. Still, its very solid and professional-looking.
Motor
While both the Hitachi and Dewalt table saws have a 15 amp motor, they differ in speed. The Hitachi C10RJ hits 4 500 RPM, while the Dewalt DWE7491RS puts out a strong 4 800 rpm. The Dewalt cuts faster than the Hitachi due to the speed it has.
Both of these tablesaws can be used to cut hardwoods as well as lumber. We were impressed by their power. So if you need a saw that can work through harder material, either one of them will do the job.
But if you need a motor that can do the job faster and more efficiently, then the Dewalt DWE7491RS is your best bet.
Table Size
One of the things we like about the Hitachi C10RJ is the larger working table. It measures 28 x 54 cm. And thanks to the telescoping table extension, you get a ripping capacity of 89 cm to the right and 56 cm to the left. This is great for woodworkers who have larger projects, because the Hitachi C10RJ wont have problems working with bigger wood pieces.
The Dewalt DWE7491RS is smaller than the DWE7491RS at 26 x 56cm, but it’s still sufficient for most projects. It also has a 32-inch rip capacity.
The table sizes are clearly different between them, with Hitachi having a larger area. The DWE7491RS fence appears stronger, however. The Dewalt is actually heavier in weight, supporting the fact.
Reduce Capacity
Here’s another area where the Hitachi C10RJ and Dewalt WE7491RS clash. The C10RJ table saw is equipped with a 25 cm 40-tooth carbide blade, while the Dewalt DWE7491RS has a 25 cm 24-tooth carbide blade.
While that may make the Hitachi the automatic winner, more teeth dont necessarily mean better. More heat is generated when there are more teeth. This eventually leads to slower cuts. Dewalt is the best choice in this instance.
Where the Dewalt table saw falls short, however, is the absence of a dado plate. Hitachi C10RJ has a 8 x 13/41cm dado capacity.
However, the Hitachi C10RJ is slightly deeper than the Dewalt DWE7491RS. Both have a cut depth of 3 inch at 0 degrees, and a maximum cut depth of 2 inch at 45 degrees.
Dust Collection System
Woodworkers know how important dust collection is in maintaining a clean work area. It lessen the clutter without having to extensively useshop vacuums for woodworkingoften.Each table saw has a dust collection system in place.
The Hitachi C10RJ has one dust port. This one dust port measures 2 inch, and is found at the rear.
As for the Dewalt DWE7491RS, youll find two. The first dust port measures 2 inch and is located under the table. The second dust port is smaller, measuring 1 inch. Its located above the blade guard, ready to collect debris above the table.
Safety Features
Safety precautions and safety features are essential when operating any power tool. And for any woodworker, preventing accidents in the workplace is extremely important.
In this aspect, we hand over the winning verdict to the Hitachi C10RJ. Its equipped with an electric brake to stop blade rotation immediately. The power switch also has an emergency off safety cover to further improve protection.
And while the Dewalt DWE7491RS has the basic safety measures like blade guard assembly, anti-kickback pawl assembly, push stick, and others, a major complaint is the small size of the power button. We expected it to be bigger, as a small power button may be detrimental if you want to stop the saw instantly.
Are you looking for a reliable and safe lawn mower to help with your garden projects? Check outour review ofHusqvarna YTA24V48 here.
Performance
The performance of Dewalt DWE7491RS compared to the Hitachi C10RJ doesnt have a big gap, to be honest. They are both great table saws that can handle big jobs excellently.
There are differences in table size, cutting speed, dust ports, and safety measures. But there are similarities too, like the 15 amp motor and cutting depth at 0 to 45 degrees.
Although the Hitachi has a higher capacity, some users have reported that the Hitachi’s miter gauge might fall out. This is an issue that is not present on the Dewalt tablesaw.
Each one is a sturdy table saw that can do the job.
Conclusion: Hitachi C10RJ OR Dewalt DWE7491RS
It all depends on your preference in the table saw battle between Hitachi DWE7491RS and Dewalt C10RJ.
Hitachi C10RJ is the best choice for craftsmen who are interested in trying out new materials. It is easy to use and offers many useful features.
